Rechargeable RGB Water Ripple Table Lamp

The tall setup measures 12.2 inches high, with a 6.7-inch shade width and a 3.94-inch base width. A shorter pole configuration is also available.

Do not soak or submerge the lamp. Keep it away from direct shower spray and standing water. Charge only in a dry location, with the charging port dry. Switch it off before wiping with a soft cloth.

Can I use it without the remote?

Yes. The touch button beneath the lamp head cycles light modes with a short tap and adjusts brightness with a long press.

Does it turn off automatically?

Yes. Choose a 1-hour or 2-hour auto-off timer with the remote, or cancel the timer to keep manual control.

What batteries does the remote need?

The remote requires two AAA batteries, which are not included. The lamp itself has a built-in rechargeable battery.

How do I switch from a table-lamp glow to ripple lighting?

Remove the flower-shaped shade to reveal the ripple projector, then select a color or effect using the controls.

• Choose seven RGB ripple effects, with gradient, breathing and flash modes.
• Switch between warm white at 2500K, natural white at 4500K and cool white at 6000K for both the main lamp and ripple projection.
• Short-tap the button beneath the lamp head to cycle modes; press and hold for stepless dimming.
• Use the remote to change color, adjust brightness and ripple speed, select night-light mode, or set a 1-hour or 2-hour auto-off timer. The timer can also be canceled.
• A built-in 5200mAh battery provides approximately 6–12 hours of use, depending on brightness and mode. USB-C 2A charging takes approximately 4 hours; the indicator changes from red while charging to green when charged.
• Two pole configurations offer tall and short setups for a nightstand, shelf or dining table.
• A white PE lampshade, round base and removable shade give you two distinct lighting looks.

1. Screw the rod into the base.
2. Add the middle rod for the taller configuration.
3. Screw on the lamp head and attach the shade. Press the shade until it clicks into place for a secure fit.

To remove the shade, assemble the lamp first. Hold the base securely, then gently lift the lower shade edge at the lamp-head joint while twisting to loosen it.